MOQUETTE. WALLS, FLOORS AND CEILINGS MADE IN ITALY. 

THE SPLENDOUR
OF MICRONISED CARPETING. 

Two-component micronised carpet,
a classy interior wallcovering that recalls the elegant, discoloured effect of carpet. Ideal for floors, walls and ceilings. 

CARPET CYCLE: WALLS AND FLOORS WITH BRICKS, MARBLE, TILES, CERAMICS AND CEMENT SELF-LEVELING.

P3D FLOOR PUTTY
(2 HANDS) in order to obtain full coverage of the leaks.
For critical surfaces, in the presence of wide and deep joints (3-4 mm ), in case of traces for implants or in case of concrete surfaces, it is necessary to insert a fibreglass mesh when applying the first coat of STUCCO P3D FLOOR.
In case of deteriorated cement it is necessary to apply the fibre mesh between the first and second coat of STUCCO P3D FLOOR.
After 6-8 hours sand with 80/100 sandpaper and remove the remaining dust.
In the case of SMOOTH WALLS WITHOUT TILES
Apply STUCCO P3D WALL (paste filler) 1-2 HANDS.
In the presence of micro cracks in the plaster, insert a fibreglass mesh between the first and second coat and apply a third coat if necessary.
Wait 6-8 hours for the product to dry.
PRIMER P3D FLOOR
Ready to go.
Wait 1-2 hours for the product to dry.
PRIMAMOQUETTE
(1 - 2 HANDS) white or coloured.
Wait 4-6 hours for the product to dry.
MOQUETTE 
catalysed at 10 % with carpet catalyst.
Apply the product with a trowel in a uniform smoothing way
the surface in various directions. (For light colours we recommend the plastic trowel).
After 4-6 hours, apply the second coat in the same way.
After 24 hours, apply two coats of MICROVETRO Bi Opaque, possibly also available in a glossy version (apply the second coat after 4-6 h for the Opaque and 6-8 h for the Glossy).
(For floors 2-3 coats are recommended)
OPTIONAL APPLICATION:
To obtain a mirror-like effect, after the first coat of MICROVETRO Bi Lucido, when the product has dried (6-8 hours), it is possible to apply CRISTALLO LIQUIDO (2 coats) using a stainless steel trowel in a uniform manner.
Wait 24 hours between first and second hand.
(for application specifications see the data sheet).